General International Maxi Lathe - 10" swing over bed, 7.5" over tool rest base, 15" between centers, 6 speeds (480, 1270, 1960, 2730, 3327, 4023 RPM), 1"x 8 TPI, MT #2 (Headstock & Tailstock), 1/2 HP, 106 LBS
Viewed: 1118 times.
|
Lathe stand and plexi glass panel. This is ideal for demos.
Viewed: 1141 times.
|
Slow speed 8" grinder setup for use with Wolverine grinding system. Wheels are 46 & 60 grit.
Viewed: 1004 times.
|
Wolverine Grinding Platform. Used for scrapers.
Viewed: 928 times.
|
Wolverine Grinding Jig. Used for gouges.
Viewed: 928 times.
|
Wolverine Skew Grinding Attachment. Used for skews.
Viewed: 946 times.
|
Wolverine Varigrind jig. Used for fingernail or Ellsworth grinds.
Viewed: 970 times.
|
Wolverine Dresser Attachment. Used to dress and true grinding wheel.
Viewed: 1000 times.
|
Texturing tool (Serious Tool Co) with 6 different pitch wheels.
Viewed: 1061 times.
|
Thread taps (3/4" x 16 tpi, 1" x 8 tpi, 1 1/4" x 8 tpi & 33m x 3.5 tpi). Also a MT2 hand reamer.
Viewed: 1012 times.
|
Longworth chuck and face plate (1" x 8 tpi). Used for reverse chucking.
Viewed: 1087 times.
|
Reverse chucking device for a MT 2.
Viewed: 1047 times.
|
Additional toolrest and centers (MT 2).
Viewed: 1077 times.
|
